Vitpilen 701 with Akrapovic and custom exhaust hanger


Viewing 9 posts - 1 through 9 (of 9 total)
  • Author
    Posts
  • #665
    AvatarPannizzle
    Participant

    My 701

    #1691
    AvatarChristopher Lee
    Participant

    Who made the hanger for you?

    #1696
    AvatarPannizzle
    Participant

    Hi Christoper – I made it myself.  It’s made from a piece of flat steel bar, 3/4mm thick.  It’s been cut to length, then gently bent / curved into the profile I wanted.  2 holes drilled at each end.  It’s mounts to the original mount point for the pillion pegs.  sprayed black and with a yellow edging.

     

    #1740
    AvatarSome Guy
    Participant

    NICE! How close does the yellow match? What brand/color is it?

    #1744
    AvatarPannizzle
    Participant

    Strangely I used some left over Alloy wheel protector I had used on my car – it’s not exactly the right yellow, the Husky yellow has a hint of Lime, but it’s very close.  This is exactly what I used – https://rimblades.com/product/trims4rims/    Its flat with a curved edge so ideal for this (you might notice I used it along the edge under the pillion seat too, just to give some additional detailing).

    #1745
    AvatarPannizzle
    Participant

    Here’s a better link – https://rimblades.com/trims4rims/

    #1751
    AvatarChristopher Lee
    Participant

    Looks great Pannizzle!  I’m about to rig something similar for the link below so I thought I’d get an idea of your process! Thanks!

    Pipe Video and Photo Here

    #1753
    AvatarPannizzle
    Participant

    Good luck, hope it goes well – let me know how you get on or if you need any help.

    #1950
    AvatarSome Guy
    Participant

    Brilliant! Thanks for the link to the product, I’ll be ordering some to do my bracket.

Viewing 9 posts - 1 through 9 (of 9 total)
  • You must be logged in to reply to this topic.