Turn signals not working


Viewing 11 posts - 1 through 11 (of 11 total)
  • Author
    Posts
  • #36040
    TheRock3tBunny
    Participant

    Straight and to the point is… my turn signals don’t work. Even when I flip the turn signal, it doesnt even show up on the dash that I turned them on.

     

    I have checked every fuse I can find and dont see anything unplugged

    #36069
    asphaltrocketeer
    Participant

    Your dashboard can’t show what’s not working. So this is nothing to worry about.

    Did you change anything recently on your bike?
    Is there still a warranty on your Vitpilen?
    If both questions are answered with no start checking the relais first.

    #36071
    TheRock3tBunny
    Participant

    No I mean when you flip a turn signal on, you see the green arrow blinking on your dash, but that isn’t there so its like the switch isn’t working. I took the bike in to the shop over a year ago bc traction control wouldn’t turn off. got the bike back and I later realized the turn signals didn’t work. So then I moved, and now a year and a half later im back to the same location in Henderson, NV. Im assuming they wont take my word saying it was them so long ago, so im trying to figure out where I should check on the bike. Maybe they forgot to plug something in… just not sure where that would be. Thanks

    #36097
    asphaltrocketeer
    Participant

    I still don’t get it, I’m sorry. It’s just the green arrow on your dashboard which doesn’t work?

    #37578
    TheRock3tBunny
    Participant

    Sorry this was so long ago. When I flip the turn signal switch, the bike has zero reaction, meaning the green arrow on the dash does not indicate that I even flipped the signal switch, and the turn signals them selves dont turn on. Almost like the left hand controls are unplugged, which they aren’t. Not sure where to start with this, I can not find a fuse out or anything.

    #37586
    Satur9
    Participant

    Did you get your gas tank replaced during recall . The turn signal flasher relay is under the tank. Mabey it got unplugged. Or just went bad.

    #37587
    TheRock3tBunny
    Participant

    No I didnt do that. It wasnt a required one. I checked fuses. I just wasnt sure what else to checj. From what i remember i had taken the tank off and looked around as much as i could and never saw anything unplugged. May just have to take it in. Just is taking forever for anyone to have time to recieve it

    #37590
    Satur9
    Participant

    Did you check relay function. If you quickly jumper the 2 wires lights should flash.

    #37639
    TheRock3tBunny
    Participant

    No im honestly not sure how to do that. But thanks for the help

    #37645
    Satur9
    Participant

    You have to pull relay  out and jumper the two wires together momentarily.

    #37653
    HALFTWIN
    Participant

    is the blinker fluid topped off

     

     

     

     

     

     

    😂

Viewing 11 posts - 1 through 11 (of 11 total)
  • You must be logged in to reply to this topic.