Thread pattern for stock mirrors This topic contains 5 replies, has 4 voices, and was last updated by Tosylate 5 months ago. Viewing 6 posts - 1 through 6 (of 6 total) Author Posts May 15, 2019 at 5:56 pm #5065 TosylateParticipant Does anyone know the thread size and pitch of the stock mirror mounts? M8? M10? I’m trying to source plugs for the holes remaining when you remove the mirrors. May 15, 2019 at 9:28 pm #5073 rlarueParticipant These are what I used for my Vitpilen 401, M10 x 1.25 https://www.amazon.com/gp/product/B07MJG4ZF3/ref=ppx_yo_dt_b_asin_title_o06_s00?ie=UTF8&psc=1 May 16, 2019 at 5:20 am #5080 Fred from franceParticipant M10 x 1.25 one with reverse thtead and the other regular thread. The reverse thread is near the kill switch. May 16, 2019 at 1:28 pm #5081 vjordanParticipant @rlarue the link is for M8 one. May 16, 2019 at 3:40 pm #5082 rlarueParticipant @vjordan It’s just that they are out of stock of M10s now. May 16, 2019 at 9:28 pm #5086 TosylateParticipant I grabbed the last set of M10s from that link. Thanks rlarue! Author Posts Viewing 6 posts - 1 through 6 (of 6 total) You must be logged in to reply to this topic.