Tank pad set


Tagged: 

This topic contains 4 replies, has 5 voices, and was last updated by  SLAPHAPPYTOYS 6 months, 2 weeks ago.

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • #1127

    Dovvan
    Participant

    Hi.

    I just got the tank pad set for my 701 vitpilen.

    Has anyone mounted these? I cant figure out how to do it because of the small “pegs” on the pad. (see pic)

    There is also adhesive tape on them

    For me it seems strange to drill holes in the “tank” of the bike or cut of the pegs of the tank pad.

    tank pad

    #1238

    Kvitpil
    Participant

    Hi. You have to drill holes In the tank. If not, i would tryto grind away the pins.

    #2963

    simas
    Participant

    Hello,

    maybe someone have some kind of manual or instructions, how to mount it?

    #2966
    JohnnyLightning
    JohnnyLightning
    Participant

    No manuals or instructions. I did as Kvitpil suggested…I ground off the pegs with a Dremel/cut-off wheel and  cleaned the surface thoroughly.  They’ve been on for several months without any sign of movement, however, I stuck them onto the alternative body panels which are hi-gloss…not sure how they’ll adhere onto the semi-matte of the original panels.

    #3084

    SLAPHAPPYTOYS
    Participant

    I am going to drill mine, I will never remove them plus I believe the will stay put better after a crash.

Viewing 5 posts - 1 through 5 (of 5 total)

You must be logged in to reply to this topic.