Question about trim on my Svartpilen 701

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • January 16, 2022 at 11:49 pm #36754
    CoreyL
    Participant

    I have a fit and finish issue with a piece of trim on my Svart 701 (see pic). Is there an easy fix for this? The two pieces are flexible but I didn’t want to try to bend anything too much for fear of cracking something. Is some disassembly required to re-align the parts?Mis-aligned panels

    January 17, 2022 at 3:05 pm #36758
    David Brazil
    Participant

    It’s been a while since I’ve had my panels off, but I’m nearly certain you have to remove and replace that left side panel to get it installed correctly. When reinstalling them, it’s very easy to run into this issue and have it not fully seated.

    Good luck.

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.