Puig Black Windscreen Installed

Viewing 1 post (of 1 total)
  • Author
  • #12225

    <p style=”text-align: left;”>Installed today; took about 30 minutes, an allen wrench, and a socket wrench. Reuses two bolts from the bike, all of the other screws/bolts/washers/bushings, are supplied.</p>
    The logo is just a vinyl sticker, and it peeled off without leaving any residue even though it was adhesive backed.

    The black option is completely opaque, but sits low enough that it did not interfere with visibility when I road tested it on the highway, and in the city.

    Greatly reduces the wind on the torso and chest at all speeds, reduces the wind noise when in an untucked position, but it did increase the wind noise in a tucked position. I was wearing the AGV  K1 helmet during both city street and highway road tests.

    My overall opinion:

    Ease of Installation: 5/5

    Wind Protection: 5/5

    Noise Reduction: 4/5

    Appearance: 4/5

Viewing 1 post (of 1 total)
  • You must be logged in to reply to this topic.