My 401


Viewing 14 posts - 1 through 14 (of 14 total)
  • Author
    Posts
  • #1535
    AvatarLazyTom
    Participant

    #1541
    AvatarLazyTom
    Participant

    1

    #1542
    AvatarLazyTom
    Participant

    #1543
    AvatarLazyTom
    Participant

    #1544
    AvatarLazyTom
    Participant

    Pictures didn’t load from my phone, finally got around to adding them from my computer. Let me know how you like it!

    #1550
    AvatarAnonymous

    Very cool. Can you offer a list of all the mod’s? You have really done something here, IMO. Thanks.

    #1552
    AvatarLazyTom
    Participant

    Sure. Here’s the things I changed:

    • Removed mirrors, replaced with one bar-end mirror (not sure what it is off the top of my head)
    • changed rear signal lights out for simple LED strip from amazon.
    • changed front signal lights out for the Motogadget m-Blaze Pin LED Turn Signals
    • Replaced plastic kit with the upgraded one from Husqvarna.
    • changed out back license plate holder with the side mount.

     

    #1620
    AvatarMathias
    Participant

    Thumbs up, looks really great!

    I´m thinking of doing something similar with my bike.

    Some reflections:

    *Is the original wiring long enough to be reach, under the seat, all the way back ?

    * Is the original Husky connectors to turnsignals etc compatible with aftermarket solutions or is it necessary to cut the wiring and attach new connectors?

    #1651
    AvatarLazyTom
    Participant

    The original wiring is long enough. I wired mine as best I could with zip ties and it looks stock.

    The original connectors are something that I cut off the old signals and wired them up to the new ones. It was a lot cleaner than wiring straight in. This way if I ever change them out, the original wiring is kept in tact.

    #3965
    AvatarVafalo
    Participant

    Bonjour

    Magnifique le noir et blanc et la plaque latérale 👍

    #3973
    AvatarGorData
    Participant

    My mods are based on your bike. Very simple and clean!

    #25345
    AvatarBakitwhy
    Participant

    After taking the wiring from the oem lights, did you have to put in a resistor to make the blinking speed correct?

    #25349
    407guy407guy
    Participant

    Very nice!

     

    #25652
    AvatarX19
    Participant

    Perfect 👌

Viewing 14 posts - 1 through 14 (of 14 total)
  • You must be logged in to reply to this topic.