LED Signals (US)


Viewing 15 posts - 1 through 15 (of 22 total)
  • Author
    Posts
  • #26864
    AvatarChristopher Lee
    Participant

    Hey guys, I’m putting LED signals on my US 701 and seems to have the fast blink. What have you guys done to combat this to obtain a steady flash?

    Add a relay? If so, where?

    #26865
    Max KoolMax Kool
    Participant

    Install an ELFR-1 flasher relay.  20 bucks on Ebay.

     

    you do need to repin it but that’s fairly easy.

     

     

    #26867
    QwandreeQwandree
    Moderator
    #26874
    AvatarChristopher Lee
    Participant

    Thank you guys, super helpful!

    #26880
    AvatarSquirrel
    Participant

    FYI the relay on the 701 is on the right side,  under the tank.  The red wire on the relay goes to the black w/ orange stripe, black goes to the yellow w/ red stripe.

     

    Here is a pic of where it is located.

    #26914
    AvatarChristopher Lee
    Participant

    Thanks Sqirrel!

    #26923
    Avatarcaferacer52
    Participant

    I just did this myself. You’ve got to remove the short adapter cable on the stock harness and rearrange the pins in the connector on the ELRF. The hardest part is pulling the stock flasher unit out of it’s holder of you aren’t pulling the tank!

    #26921
    Max KoolMax Kool
    Participant

    Btw, here’s how you should repin the connector from the LED flasher.

     

    #26925
    Max KoolMax Kool
    Participant

    Yeah, you need small, strong hands for that. Btw, I mounted the new flasher on the radiator, so it wouldn’t be rattling around.

    #26958
    AvatarChristopher Lee
    Participant

    Thanks for the info Max, how did you repin it?  Push the pin from inside of the connector?

    #26959
    Max KoolMax Kool
    Participant

    Yeah there’s a little latch on the inside, hard to explain. Press against it with a small screwdriver and the pin can be pulled out.

    #26960
    AvatarChristopher Lee
    Participant

    Great, Thanks Max.  Just trying to get any info about it before it gets here Friday when I start playing with it.

    #26964
    Max KoolMax Kool
    Participant

    Pic found in another thread:

    #26965
    AvatarChristopher Lee
    Participant

    Awesome! Thanks

    #30284
    Avatarduvinclunk
    Participant

    Is the factory relay in the same position as shown on the 401 how to?

Viewing 15 posts - 1 through 15 (of 22 total)
  • You must be logged in to reply to this topic.