Grinded on the left side of the engine


Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #28733
    AvatarPaddysVitpil
    Participant

    Just bought a new Vitpilen401 2020mod, were I did notice something at the left side of the engine. There had been grinded were the sealing shows.

    What’s up with that, is that a normal thing that Husqvarna does? I’m confused, thanks for helping!

    #28736
    Max KoolMax Kool
    Participant

    pic please?

    #28748
    Satur9Satur9
    Participant

    I have that on my 701 as well. Don’t have a pic yet. But it you look above the front sprocket. There is a small bit of bare metal instead of black engine paint.

    #28749
    AvatarPaddysVitpil
    Participant

    <p style=”text-align: center;”>The description is familiar with the 401, wouldn’t the small bit, with bare stainless steel, have higher risk with corrosion? And possibility damage the sealing. Depending on the environment.</p>
    I looked up some picture from the fabrication, and there seems like it don’t show any sort of small bit of bare metal.

    will upload pic asap!

Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.