Greetings / Tail Tidy Blinker question


Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #12128
    wdwmkrwdwmkr
    Participant

    hey all-

    picking up my Vit401 Friday- to those who have updated / replaced blinkers with sleeker LED options, has anyone found load resistors needed? i’ve yet to find any info on that on the forums- if i’ve missed, kind apologies-

     

    many thanks in advance

    #12141
    Avatarpurloined
    Participant

    I replaced the OEM incandescent turn signals on my 2018 401 with MotoGadget bar end turn signals (LED) which worked, but blinked too rapidly. Someone on this forum suggested a relay from ‘CustomLEd’. Seems like a very well run company, I had to (at their instruction) relocate the two wires in their plug, cut the tab on the relay and squeeze it into the rubber holder that hangs from the tab on the frame. Otherwise very simple and it plugs into the receptacle on the bike’s harness. The blinkers now work as they should.

    ELFR-1 Electronic LED Flasher Relay with OEM Connector

    #12150
    wdwmkrwdwmkr
    Participant

    great info, many thanks- i was fairly certain something may be required.

    #12152
    Avatarpurloined
    Participant

    Pioneer401 wrote and illustrated a nicely detailed DIY on turn signal replacement. The latter pertains to the relay, location etc.

    DIY Front turn signal install procedure, hyperflash relay fix

Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.