Fork Tube Tree Size in MM


Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #2624
    AvatarTattooRichie
    Participant

    Good Day Team

    Doe anyone here know the fork tube size that slides into the trees in mm? I am looking to replace the stock bars with some 2 piece clamp on risers that I can attach directly under the top tree. I found a nice 3 inch high set so I can adjust the height on Fork tube and give me the bars closer in and slightly higher. Should be just enough so that I will not have brake line and cable issues. I recall that the slider tubes are 43 mm hence the main tubes are slightly under 2 inches hence 50 or 52 mm prehaps. Anyone know for sure. I can’t seem to find my damn caliper!

    In other words, can anyone measure fork tube hole size in mm on the tree?

    Thanks

    #2627
    AvatarMacloven
    Participant

    With my cheap calipers measuring the cap got 50.5 mm.

Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.