Condensation


Viewing 12 posts - 1 through 12 (of 12 total)
  • Author
    Posts
  • #4437
    AvatarVafalo
    Participant

    Bonjour

    J ai de la condensation dans le compteur ??

    Est-ce pris en garentie ??

    #4441
    AvatarAlto
    Participant

    Hi Vafalo,
    Sorry for the reply in English my french is shockingly bad.

    I had problems with both dust and condensation in my 401’s yogurt pot lid instrument cluster. With the dust I managed to get the unit replaced under warranty but then started having problems with condensation on the second one (I didn’t bother getting it changed again).

    I was told it was a sealed unit but on closer inspection I noticed there are 4 screws on the underside of the unit once you remove it from the holder on the bike. You could try taking it off , undoing those screws to get the plastic top off and give it a wipe.

    It seems a real design flaw in the yogurt pot lid that the gap around the edge lets moisture in but then cant seem to let it get back out. I’ve just traded in my 401 for a 701 and the first thing I have done is put insulation tape around that gap.

    • This reply was modified 1 year, 1 month ago by AvatarAlto.
    #4446
    AvatarVafalo
    Participant

    Bonjour

    Merci

    Je vais regarder ça

    De plus, mon compte tour n est pas éclairé de nuit !!!

    Merci

    Cordialement

     

    #4452
    MaxenceMaxence
    Participant

    Salut,

    lorsque j’ai eu mon probleme de levier d’embrayage, ma concession avait remarqué de la buée dans le compteur, qu’ils m’ont gentillement remplacer par un neuf.. sauf qu’après ca, des problèmes électronique sont arrivés : le shifter ne fonctionnait plus et jauge à essence inversé ! Ce qui m’a causé une panne d’essence ! Apres des jours en concession pour qu’ils essaient de synchroniser le compteur à ma moto correctement, ils m’ont finalement remis l’ancien compteur car impossible pour eux (et surtout husqvarna) de régler le problème !

    C’est assez embêtant a 10k € le bout.

    En revanche, le compte tour est censé être rétro éclairé ??? J’avoue que je me suis deja fait la réflection.. mais je crois que c’est normal!

    #4485
    701xyz701xyz
    Participant

    Hello,

    Also condensation here on my 701 ( 1600km old ) suddenly out of the blue.

    Dealer has reported it to Husqvarna NL, so have to wait.

    Have to check if it lights up in dark

     

    condens

     

    #4489
    AvatarVafalo
    Participant

    Bonsoir

    merci pour ces réponses

    C est vrai qu’à 10000  euros ce n’ est pas terrible

    Cordialement

     

    #4552
    AvatarVafalo
    Participant

    Bonsoir

    Quelqu’un pourrait poster une photo du compteur allumé de nuitp

    Merci

    #4554
    AvatarAlto
    Participant

    Here you go. Hope it helps.

    #4556
    AvatarVafalo
    Participant

    Merci

    Le compte tour n est pas eclairé

    Cordialement

    #4621
    AvatarRaoul
    Participant

    I have had the same, Had the speedo changed but then as it wasn’t set up I had to wait a month as after been back at the dealers the autochange wasn’t working…turned out the speedo hadn’t been set up from the factory so the bike couldn’t take the reprogramming :/

    #4622
    AvatarWeißer Pfeil
    Participant

    has anyone tried connecting one of those nice new duke displays?

    #12239
    AvatarNeoRetro
    Participant

    has anyone tried removing and cleaning the cover? I have some condensation but it’s not a big deal. Looks like it’s just a few screws?

Viewing 12 posts - 1 through 12 (of 12 total)
  • You must be logged in to reply to this topic.