Clutch line path


Tagged: 

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • #34866
    Avatarboras
    Participant

    Hello !

    I’ve recently installed heated grips in my HQ vitpilen  701 from 2018.

    after assembling everything back (squeezing all wires back was really difficult) I can see that when I steer the clutch line moves really clunky, i am not sure if i placed it correctly.

    It goes from the clutch with all wires under the cover behind the front light, goes out from the cover on the left side of that cover (there is a circular cut there) and then kinda towards front of the bike and turn itself to go back under the light (inner side of the fork).

    It sometimes touches one of the screws on the side of light and i am afraid that it will block me while turning

    thanks for helo

    #34884
    Avatarboras
    Participant

    I realised I didn’t really ask any question.

    Could someone please take a photo of clutch line around front light, I would like to see if it goes behind the cover and if so, where exactly.

    Many thanks

     

    #34961
    Avatarboras
    Participant

    A cheeky bump 🙂

    #34964
    Max KoolMax Kool
    Participant

    #34992
    Avatarboras
    Participant

    Ah, so it does not go under light cover at all.
    Thank you very much!

    • This reply was modified 1 month, 3 weeks ago by Avatarboras.
    • This reply was modified 1 month, 3 weeks ago by Avatarboras.
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.