Bike’s engine cutting while downshifting, Svart 401 2021


Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #34974
    AvatarFrancis G
    Participant

    The engine cut, while a downshift from 4-3 and 3-2 once in a while. it happenned 5 times. Is it worth to bring it back to the dealer or that will stop happening ?

    Anyone experience something like that and solved it ?

    The Svart his brandnew, 250km now on it.

    I’m a beginner, I have the same experience than my bike, and now I don’t feel to confident.

    #34990
    Avatarreverb
    Participant

    …hello I saw that is a thing of the way you handle the throttle grip. Remember that is “ride by wire” do not have a cable (a wire) so send an electric impulse to the ECU and I noticed that in some situations mainly around Second gear to N or similar, you can stall the bike.

    May be you would check your way to ride etc if this is your first bike you have a lot to see and check when commuting.

Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.