Bar End Removal.


Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #2514
    AvatarSLAPHAPPYTOYS
    Participant

    Hello all,

    Trying to install some Arrow bar end mirrors but can not get the bar end caps off. Removed the bolt, but did not want to put a wrench on it just yet, thought I would check here first.

    Do they just unscrew?

     

    Thanks,

    Slap.

    #2520
    BuddahBuddah
    Participant

    It´s suposed to just unscrew  but mine was stuck as well, just take out the screw completly and put a narrow screwdriver in there and jiggle it a bit.

    #2521
    AvatarDAP831
    Participant

    The bar ends are just a screw and wedge. Don’t remove the bolt all the way. Just loosen the bolt a few turns then tap the bolt to loosen the wedge and the whole thing will slide right out.

    #4288
    Avatarelpedro
    Participant

    In case it helps anyone, one of mine was stuck after loosening the bolt wedge. I ended up having to wrap it in a rag and take some long-handled channel-lock pliers to it. Once it broke free and came out, there seemed to be dried glue all over it…

Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.