701 Akrapovic pipe


Tagged: 

Viewing 15 posts - 1 through 15 (of 46 total)
  • Author
    Posts
  • #850
    StevenSteven
    Participant

    What are your thoughts on this

    https://youtu.be/6gNwfwSvzts

     

    #887
    AvatarDVSE
    Participant

    I have the Akro on mine and think it sounds much better than stock pipe, not sure about drilling to remove the baffle though – bloody expensive if it goes wrong.

    #888
    QwandreeQwandree
    Moderator

    @dvse: much louder or just nicer sound?

    How much was it?

    #891
    AvatarDVSE
    Participant

    not significantly louder, but deeper tone and suits the bike better.  The is a baffle that could be removed if you are prepared to drill out the rivet securing it.

    The list price from Husky is £751.00, but i got a good deal as i ordered it and a few other accessories when i bought the bike.

    #945
    AvatarAnders
    Participant

    Ready for action

    #946
    AvatarAnders
    Participant

     

    #947
    AvatarAnders
    Participant

    How i removed the DB Killer 🙂

    #948
    StevenSteven
    Participant

    That look awesome. Thank you for your pic by pic post. Always helpful to see the step by step.

    #981
    AvatarMichele
    Participant

    Very nice job ! I think I will leave the dB killer on … thank you for posting all the step by step pics !

    #984
    StevenSteven
    Participant

    #985
    AvatarMyel
    Participant

    very good explanation thank you.
    Must the motorcycle be adjusted after the modification?
    the 701 in yellow under saddle, how is it?
    thank you

    #987
    StevenSteven
    Participant

    Got some vinel printed in the same yellow as the one by the tank. Than got a clear to be put over the top of it to help prevent road rash on the underside cause of the removal of the rear fering.

    #1280
    Avatardesmo16rr
    Participant

    #1281
    Avatardesmo16rr
    Participant

    #1282
    Avatardesmo16rr
    Participant

Viewing 15 posts - 1 through 15 (of 46 total)
  • You must be logged in to reply to this topic.