Reply To: Gas gauge malfunction


#1138
MaineRider
Participant

Brought mine in for the 600mi service a week or so ago, they did the valve clearance check which is where all the labor comes from, mine was $392.

They said to set the RPM1 warning to 9K and the RPM2 warning to 10K, took it out for a long ride this weekend and that definitely seemed to be about right for redline.

Gas gauge on these is definitely sketchy, I filled mine up, holding it level and it was reading full, but it didnt take but a few minutes on the road for it to be down to 7/8 or so. They definitely seem to err on the side of “less”.